ABCON Sensors :

General Purpose Photoelectric Sensors

Amplifier Built-in • Miniature DC Type

989-S SERIES

A range of multi-purpose photoelectric sensors with integrated amplifiers suitable for the detection of opaque parts. The sensors are housed in a miniature enclosure measuring just 13.5 x 40 x 10mm (Background suppressed versions : 13.5 x 32 x 20mm).

Available with either 2m of pre-moulded cable or industry standard M8 connector. All units come complete with LED operation indicator and sensitivity adjustment, along with programmable Normally Open/Normally Closed transistor output.

Type	Thru-beam			Polarised Retroreflective			Diffuse Reflective			Background Suppressed
Output Type	PNP	NPN		PNP	NPN		PNP	NPN		PNP	NPN
Cable	R989SP	R989SN		B989SP	B989SN		P989SP	P989SN		PS989SP	PS989SN
M8 connector	RCO989SP	RCO989SN		BCO989SP	BCO989SN		PCO989SP	PCO989SN		PSCO989P	PSCO989N
Sensing Range	4000mm			1000mm*			30 to 250mm			15 to 80mm
Supply voltage	10 to 30V DC +/- 10%
Polarity reversal protection	Incorporated
Ripple	10% or less
Current consumption	25mA or less
Output	<PNP Output types> PNP Open Collector transistor. Maximum source current : 100mA. Applied voltage : 30V or less. Residual voltage : 2V or less						<NPN Output types> NPN Open Collector transistor. Maximum sink current : 100mA. Applied voltage : 30V or less. Residual voltage : 2V or less
	Normally open or Normally closed (selected by wiring)
	Incorporated
Operation indicator	L.E.D
Emitting Element	Modulated Red L.E.D (6kHz)
Response time	1ms or less (maximum switching frequency 500Hz)
Ambient temperature	0 to 50^oC Operating (-20 to +80^oC Storage)
Ingress protection	IP67 (IEC 144) for cable types / IP65 (IEC144) for connector types
Accessories Included	-		Reflector Part No. 1111			-			-

* Note: Sensing range when used with reflector 1111. Sensing range increases to 1500mm when used with 84mm diameter reflector

Touch to Teach • Programmable Output

946/966-S SERIES

A range of photoelectric sensors incorporating touch-to-teach technology. The 966-S range includes a LED bargraph sensitivity display - ideal for applications where increased performance and user feedback is required.

All versions are available with either 2m of pre-moulded cable or industry standard M8 connector along with programmable Normally Open/Normally Closed and PNP or NPN transistor output. A 5-second on-delay/off-delay timer and remote teaching input is also included on all variants.

Type	Axial Diffuse		Axial Polarised Retroreflective
Cable	PA946S		BA946S
M8 connector	PA946COS		BA946COS
Bargraph version	PA966S / PA966COS		BA966S / BA966COS
Sensing range	500mm		1000mm*
Supply voltage	10 to 30V DC +/- 10%
Output	PNP or NPN Open Collector transistor Source/sink current : 100mA
Emitting element	Modulated infrared	Modulated red
Response time	0.5ms or less (max switching frequency 1KHz)
Timer function	On/off delay 0 to 5 seconds (in 500ms steps)
Ambient temperature	0 to 50^oC Operating (-20 to +80^oC Storage)
Ingress protection	IP65 (IEC144)

Type	Lateral Diffuse	Lateral Polarised Retroreflective
Cable	PL946S	BL946S
M8 connector	PLCO946S	BLCO946S
Bargraph version	PL966S / PLCO966S	BL966S / BLCO966S
Sensing range	450mm	1000mm*
Supply voltage	10 to 30V DC +/- 10%
Output	PNP or NPN Open Collector transistor Source/sink current : 100mA
Emitting element	Modulated infrared	Modulated red
Response time	0.5ms or less (max switching frequency 1KHz)
Timer function	On/off delay 0 to 5 seconds (in 500ms steps)
Ambient temperature	0 to 50^oC Operating (-20 to +80^oC Storage)
Ingress protection	IP65 (IEC144)

Multivoltage • Economical

FQ SERIES

A range of general-purpose photoelectric sensors suitable for standard sensing applications. The thru-beam and retro reflective version offer impressive sensing ranges of 20m and 13m respectively. Consequently, they are ideally suited to general conveyor, industrial door and barrier applications.

The transistor output types come with both NPN and PNP outputs as standard. All versions come with either 2m of pre-moulded cable or standard M12 connector. All variants are rated IP65.

Type	Thru-beam		Retroreflective		Diffuse Reflective
Output Type	PNP/NPN	Relay	PNP/NPN	Relay	PNP/NPN	Relay
Cable	FQ03/04	FQ07/08	FQ02	FQ06	FQ01D3	FQ05D3
M12 connector	FQ03/04K	FQ07/08K	FQ02K	FQ06K	FQ01D3K	FQ05D3K
Supply Voltage	12-30V DC	18-230V AC/DC	12-30V DC	14-230V AC/DC	12-30V DC	14-230V AC/DC
Sensing Range	20m		13m		180mm
Output	<PNP/NPN Output types> PNP or NPN Open Collector transistor • Maximum source/sink current : 200mA •Applied voltage : 30V or less • Residual voltage : 1.8V or less			<Relay Output types> Relay Contact • Maximum DC output current : 3A 30V DC • Maximum AC output current : 1A 220V AC
Emitting Element	Modulated infrared L.E.D (875nm)
Response time	PNP/NPN Types 5ms or less / Relay Types 100ms or less
Ambient temperature	-10 to +60^oC Operating (-20 to +80^oC Storage)
Ingress protection	IP65 (IEC 144)

Multivoltage • Long Range • Thru-Beam

FW SERIES

Long-range, thru-beam photoelectric sensors with multi-voltage input and relay contact output. The FW-T model has a multi-function timer with on-delay/off-delay and one-shot settings (0 to 7 seconds). Both versions come with terminal connectionts and are rated IP67.

Type	Thru-beam	Thru-beam with Timer
Part Number	FW07/08	FW07/08T
Sensing range	25m	25m
Supply voltage	14 to 230V AC/DC -15/+10%
Output	Relay contact (3A @ 250V AC, 3A @ 30V DC)
Emitting element	Modulated infrared (875nm)
Response time	100ms or less (max switching frequency 10Hz)
Timer function	On/off delay/single shot (0 to 7 seconds)
Ambient temperature	-10 to +60^oC
Ingress protection	IP67 (IEC144)

Food Processing
ABCON are acredited to ISO 9001

Allen Bennett Controls are proud to be accredited to ISO 9001:2000 Certificate No. 980142.